Ethereum Mining on Ubuntu 18.04 and Debian - LinuxConfig.org

Aeon

Aeon (AEON) is a private, secure, untraceable currency. You are your bank, you control your funds, and nobody can trace your transfers.
[link]

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/
NewEnglandcoin
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
https://www.youtube.com/playlist?list=PLUl4u3cNGP63UUkfL0onkxF6MYgVa04Fn
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg
How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1
Milestones
Roadmap
NENG v1.4.0 Android Mining, randomSpike Evaluation https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/NENG_2020_Q3_report/NENG_2020_Q3_report.pdf
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2020Q1_Report/Scrypt_RandomSpike_NENGv1.3.0_Hardfork_Proposal.pdf
NENG Security, Decentralization & Valuation
https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2019Q2_report/NENG_Security_Decentralization_Value.pdf
Whitepaper v1.0 https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/whitepaper_v1.0/NENG_WhitePaper.pdf
DISCORD https://discord.gg/UPeBwgs
Explorer
http://www.findblocks.com/exploreNENG http://86.100.49.209/exploreNENG http://nengexplorer.mooo.com:3001/
Step by step guide on how to setup an explorer: https://github.com/ShorelineCrypto/nengexplorer
Github https://github.com/ShorelineCrypto/NewEnglandCoin
Wallet
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.5
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.3
MacOS Wallet (10.11 El Capitan or higher): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.2
Android with GNUroot on 32 bits old Phones (alpha release) wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0
Windows wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.3.0.1
addnode ip address for the wallet to sync faster, frequently updated conf file: https://github.com/ShorelineCrypto/cheetah_cpumineblob/mastenewenglandcoin.conf-example
How to Sync Full Node Desktop Wallet https://www.reddit.com/NewEnglandCoin/comments/er6f0q/how_to_sync_full_node_desktop_wallet/
TWITTER https://twitter.com/newenglandcoin
REDDIT https://www.reddit.com/NewEnglandCoin/
Cheetah CPU Miner Software https://github.com/ShorelineCrypto/cheetah_cpuminer
Solo Mining with GPU or ASIC https://bitcointalk.org/index.php?topic=5027091.msg52187727#msg52187727
How to Run Two Full Node in Same Desktop PC https://bitcointalk.org/index.php?topic=5027091.msg53581449#msg53581449
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708 (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
FindBlocks http://findblocks.com/
CRpool http://crpool.xyz/
Cminors' Pool http://newenglandcoin.cminors-pool.com/
SPOOL https://spools.online/
Exchange
📷
https://shorelinecrypto.com/
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support https://bitcointalk.org/index.php?topic=5027091.msg55098029#msg55098029
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support https://bitcointalk.org/index.php?topic=5027091.msg54977437#msg54977437
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros https://bitcointalk.org/index.php?topic=5027091.msg54898540#msg54898540
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina https://bitcointalk.org/index.php?topic=5027091.msg54839522#msg54839522
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade https://bitcointalk.org/index.php?topic=5027091.msg54830333#msg54830333
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support https://bitcointalk.org/index.php?topic=5027091.msg54803639#msg54803639
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation https://bitcointalk.org/index.php?topic=5027091.msg54777222#msg54777222
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020 https://bitcointalk.org/index.php?topic=5027091.msg54694233#msg54694233
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode https://bitcointalk.org/index.php?topic=5027091.msg54645726#msg54645726
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing https://bitcointalk.org/index.php?topic=5027091.msg54030923#msg54030923
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1 https://bitcointalk.org/index.php?topic=5027091.msg53900926#msg53900926
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork https://bitcointalk.org/index.php?topic=5027091.msg53735458#msg53735458
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff https://bitcointalk.org/index.php?topic=5027091.msg53617358#msg53617358
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply https://www.reddit.com/NewEnglandCoin/comments/envmo1/explanation_of_base_diff_reset_and_effect_of/
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released https://bitcointalk.org/index.php?topic=5121953.msg53391184#msg53391184
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin https://bitcointalk.org/index.php?topic=5027091.msg52331201#msg52331201
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC https://bitcointalk.org/index.php?topic=5027091.msg52169572#msg52169572
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release https://bitcointalk.org/index.php?topic=5027091.msg51745839#msg51745839
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc https://bitcointalk.org/index.php?topic=5027091.msg51312291#msg51312291
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto https://bitcointalk.org/index.php?topic=5027091.msg50714764#msg50714764
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation https://bitcointalk.org/index.php?topic=5027091.msg50506585#msg50506585
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50417196#msg50417196
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50332097#msg50332097
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50208194#msg50208194
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated https://bitcointalk.org/index.php?topic=5027091.msg49931305#msg49931305
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin https://bitcointalk.org/index.php?topic=5027091.msg49875242#msg49875242
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork https://bitcointalk.org/index.php?topic=5027091.msg49831059#msg49831059
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork https://bitcointalk.org/index.php?topic=5027091.msg49685389#msg49685389
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac https://bitcointalk.org/index.php?topic=5027091.msg49218760#msg49218760
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet https://bitcointalk.org/index.php?topic=5027091.msg49202088#msg49202088
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows https://bitcointalk.org/index.php?topic=5027091.msg49004345#msg49004345
Dec 31, 2018 - Technical Whitepaper is Released https://bitcointalk.org/index.php?topic=5027091.msg48990334#msg48990334
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux https://bitcointalk.org/index.php?topic=5027091.msg48935135#msg48935135
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue https://bitcointalk.org/index.php?topic=5027091.msg48668375#msg48668375
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48258465#msg48258465
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC https://bitcointalk.org/index.php?topic=5027091.msg48298311#msg48298311
Nov 29, 2018 - A Warning to ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

Running a Bitcoin node on a $11.99 SBC

Running a Bitcoin node on a $11.99 SBC
Just wanted to let you guys know that I'm successfully running a (pruned) Bitcoin node + TOR on a $11.99 single board computer (Rock Pi S).
The SBC contains a Rockchip RK3308 Quad A35 64bit processor, 512MB RAM, RJ45 Ethernet and USB2 port and I'm using a 64GB SDCard. It runs a version of Armbian (410MB free). There's a new version available that even gives you 480MB RAM, but I'm waiting for Bitcoin Core 0.19 before upgrading.
To speed things up I decided to run Bitcoin Core on a more powerful device to sync the whole blockchain to an external HDD. After that I made a copy and ran it in pruned mode to end up with the last 5GB of the blockchain. I copied the data to the SD card and ran it on the Rock Pi S. After verifying all blocks it runs very smoothly. Uptime at the moment is 15 days.
I guess you could run a full node as well if you put in a 512GB SDcard.
The Rock Pi S was sold out, but if anybody is interested, they started selling a new batch of Rock Pi S v1.2 from today.
Screenshot of resources being used
Bitcoin Core info
Around 1.5 GB is being transferred every day
---
Some links and a short How to for people that want to give it a try:
  1. This is the place where I bought the Rock Pi S.
  2. Here you find more information about Armbian on the Rock Pi S. Flash it to your SDCard. Follow these instructions.
  3. Disable ZRAM swap on Armbian. If you don't do this eventually Bitcoin Core will crash. nano /etc/default/armbian-zram-config ENABLED=false
  4. Enable SWAP on Armbian sudo fallocate -l 1G /swapfile sudo chmod 600 /swapfile sudo mkswap /swapfile sudo swapon /swapfile sudo swapon --show sudo cp /etc/fstab /etc/fstab.bak echo '/swapfile none swap sw 0 0' | sudo tee -a /etc/fstab
  5. Set up UFW Firewall sudo ufw default deny incoming sudo ufw default allow outgoing sudo ufw allow ssh # we want to allow ssh connections or else we won’t be able to login. sudo ufw allow 8333 # port 8333 is used for bitcoin nodes sudo ufw allow 9051 # port 9051 is used for tor sudo ufw logging on sudo ufw enable sudo ufw status
  6. Add user Satoshi so you don't run the Bitcoin Core as root sudo adduser satoshi --home /home/satoshi --disabled-login sudo passwd satoshi # change passwd sudo usermod -aG sudo satoshi # add user to sudo group
  7. Download (ARM64 version) and install Bitcoin Core Daemon
  8. Download and install TOR (optional). I followed two guides. This one and this one.
  9. Create a bitcoin.conf config file in the .bitcoin directory. Mine looks like this: daemon=1 prune=5000 dbcache=300 maxmempool=250 onlynet=onion proxy=127.0.0.1:9050 bind=127.0.0.1 #Add seed nodes seednode=wxvp2d4rspn7tqyu.onion seednode=bk5ejfe56xakvtkk.onion seednode=bpdlwholl7rnkrkw.onion seednode=hhiv5pnxenvbf4am.onion seednode=4iuf2zac6aq3ndrb.onion seednode=nkf5e6b7pl4jfd4a.onion seednode=xqzfakpeuvrobvpj.onion seednode=tsyvzsqwa2kkf6b2.onion #And/or add some nodes addnode=gyn2vguc35viks2b.onion addnode=kvd44sw7skb5folw.onion addnode=nkf5e6b7pl4jfd4a.onion addnode=yu7sezmixhmyljn4.onion addnode=3ffk7iumtx3cegbi.onion addnode=3nmbbakinewlgdln.onion addnode=4j77gihpokxu2kj4.onion addnode=5at7sq5nm76xijkd.onion addnode=77mx2jsxaoyesz2p.onion addnode=7g7j54btiaxhtsiy.onion ddnode=a6obdgzn67l7exu3.onion
  10. Start Bitcoin Daemon with the command bitcoind -listenonion
Please note that I'm not a professional. So if anything above is not 100% correct, let me know and I will change it, but this is my setup at the moment.
submitted by haste18 to Bitcoin [link] [comments]

Bitcoin Rhodium Mining Guide

Bitcoin Rhodium Mining Guide
Happy Mining!

All available XRC pools can be found on MiningPoolStats

Bitcoin Rhodium Mining Hardware

Baikal Giant+: 1.6 GH/s
Baikal Quad Cube: 1.2 GH/s
Baikal Giant: 900 MH/s
Baikal Quadruple Mini Miner: 600 MH/s
Baikal Miner Cube: 300 MH/s
Baikal Mini Miner: 150 MH/s

Mining Setup

To mine Bitcoin Rhodium you need to set up an XRC wallet and configure your miner of choice. You can choose between Web wallet, Electrum-XRC or Magnum wallet. To set up a web wallet please visit wallet.bitcoinrh.org. Or download and install Electrum-XRC wallet (recommended) for Windows, Linux and MacOS.
Web wallet: wallet.bitcoinrh.org
Electrum-XRC wallet: electrum.bitcoinrh.org
Magnum wallet: https://magnumwallet.co

Sign up for XRC web wallet if not yet done so

  1. Create an account, with your username, password and secure question.
  2. Sign in and click “Create Wallet”.
  3. Set up a strong transaction password. Make sure you store it securely in a secure password manager of choice.
  4. Copy the seed somewhere safe. It’d be a good idea to write seed on a hardcopy and keep it safe.
  5. Paste it to confirm you got it right.
  6. Grab an address for the mining step. Your wallet is now ready to mine XRC.

Instructions for mining XRC on the official pool

Pool link: poolcore.bitcoinrh.org
  1. Any miner that supports X13 will be able to mine XRC. We have a few examples below of miners that are well tested with Bitcoin Rhodium network.
  2. For any miner, configure the miner to point to:
(0–0.8 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3061
(0.8–2 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3062
(3–4 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3063
(5+ GH/s) stratum+tcp://poolcore.bitcoinrh.org:3064
with your XRC address as username and x as password. You don’t need to open an account on pool. You will be mining to XRC address and mined coins will be transferred to your wallet
after blocks reach 10 block maturity
after you mined up minimal amount of coins (currently 0.1 XRC)
sometimes mined blocks could get rejected by network (orphaned) after they were counted as valid blocks. This is normal network behavior to follow longest chain
  1. http://poolcore.bitcoinrh.org is used to follow your miner and network statistics.

CPU Miner-Multi

Source: https://github.com/tpruvot/cpuminer-multi
Sample configuration with CPU Miner tested on UBUNTU.
{
“url” : “stratum+tcp://poolcore.bitcoinrh.org:3061”, “user” : “YOUR XRC ADDRESS”,
“pass” : “x”,
“algo” : “x13”, “threads” : 1,
“cpu-priority” : 5,
“cpu-affinity” : 1, “benchmark” : false, “debug” : true, “protocol”: true, “show-diff”: true, “quiet” : false
}
Command to run your CPUMiner: cpuminer -c cpuminer.json

SGMiner (ATI GPU)

SGMiner is a GPU-based mine: https://github.com/nicehash/sgminereleases
The configuration below was tested on Windows:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
cd C:\Software\sgminer-5.6.1-nicehash-51-windowsamd64 sgminer.exe
— gpu-platform 1 — algorithm x13mod -url stratum+tcp://poolcore.bitcoinrh. org:3062 — pool-user — userpass :x — auto-fan — temp-target 70 — temp-over- heat 82 — temp-cutoff 85 — gpu-fan 65–85 — log-file log.txt — no-adl — no-extra- nonce -P –T

CCMiner (NVIDIA GPU)

CCMiner is a GPU-based miner (NVIDIA)
Command to run your CCMINER:
ccminer-x64.exe -a x13 -o stratum+tcp://poolcore.bitcoinrh.org:3062 -O :without -D — show-diff

Baikal miner

Settings: Url:
(0–2 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3062
(3–4 GH/s) stratum+tcp://poolcore.bitcoinrh.org:3063
(5+ GH/s) stratum+tcp://poolcore.bitcoinrh.org:3064
Algo: x13User: your XRC receiving address (make sure you set 2 distinct addresses for each hashing board)
Pass: x
Extranonce: leave off Priority set to 0 and 1
Once pool stratum address and your wallet as user are set up you should see your miner mining against XRC pool. When miner is working the status column is green. The pool and miner are incorrectly configured now as status says “Dead” highlighted in red.

Instructions for mining XRC on BSOD pool

Pool link: bsod.pw/en/pool/dashboard/XRC/
Use this code for your miner: -a x13 -o stratum+tcp://pool.bsod.pw:2582 -u WALLET.rig
BSOD pool allows both solo and party mining.
For solo mining use code: -a x13 -o stratum+tcp://pool.bsod.pw:2582 -u WALLET.rig -p m=solo And for party mining use: -a x13 -o stratum+tcp://pool.bsod.pw:2582 -u WALLET.rig -p m=party.yourpassword
NOTICE: You can use us for North America and asia for Asia instead of euin your .bat file or config.
You can also use BSOD pool’s monitor app for Android and iOS.

Instructions for mining XRC on ZERGPOOL

Zergpool offers low fees (just 0.5%) and also SOLO and PARTY mining with no extra fees.
To mine XRC on Zergpool use this command lines for your miner:
Regular: -a x13 -o stratum+tcp://x13.mine.zergpool.com:3633 -u -p c=XRC,mc=XRC Solo: -a x13 -o stratum+tcp://x13.mine.zergpool.com:3633 -u -p c=XRC,mc=XRC,m=solo Party: -a x13 -o stratum+tcp://x13.mine.zergpool.com:3633 -u -p c=XRC,mc=XRC,m=party
Use your coin wallet address as username in mining software. Specify c=SYMBOL as password to identify payout wallet coin, and the same coin in mc=SYMBOL to specify mining coin.
For more information and support please visit http://zergpool.com
Notice that when there are more pools mining XRC in different geographic/availability locations choose the nearest to you as lowest priority and then add desirable fall back pool options in different geographic locations or pools. This is useful when one pool experiences issues, to fall back to different pool in Bitcoin Rhodium network.

Calculate your Bitcoin Rhodium mining profitability

WhatToMine: https://whattomine.com/coins/317-xrc-x13
CoinCalculators: https://www.coincalculators.io/coin/bitcoin-rhodium

Feel free to ask questions in Discord community. There are lots of helpful people around the world watching XRC 24x7.

Bitcoin Rhodium Dev Team
submitted by BitcoinRh to BitcoinRhodium [link] [comments]

Vertnode - An automated solution for installing Vertcoin node(s) on Single Board Computers

Hello Vertcoin Community,
Eager to contribute to the Vertcoin Community I began creating step by step walkthrough guides on how to get a Vertcoin node up and running on a Raspberry Pi, Raspberry Pi Zero and Intel NUC. Along with information to get a Vertcoin node up and running was also optional steps to install p2pool-vtc.
I decided that while this step by step guide might be helpful to a few, a setup script may prove to be useful to a wider range of people. I have this script to a point where I think it may be productive to share with a bigger audience, for those who are brave and have this hardware sitting around or like to tinker with projects; I invite you to test this setup script if you are interested, if you run into errors any sort of verbose console output of the error proves to be extremely helpful in troubleshooting.
The script was designed to produce a “headless” server... meaning we will not be using a GUI to configure Vertcoin or check to see how things are running. In fact, once the server is set up, you will only interact with it using command line calls over SSH. The idea is to have this full node be simple, low-power, with optimized memory usage and something that “just runs” in your basement, closet, etc.
Why run a headless node on a Single Board Computer?
The idea is to have this full node be simple, low-power, with optimized memory usage and something that “just runs” in your basement, closet, etc.
Required: USB Flash Drive 6GB - 32GB
Please note that the script was designed for Single Board Computers first and looks for an accessible USB Flash Drive to use for storing the blockchain and swap file, as constant writing to a microSD can degrade the health of the microSD.
Supports

Hardware

All of the hardware listed above is hardware that I have personally tested / am testing on myself. The plan is to continue expanding my arsenal of single board computers and continue to add support for more hardware to ensure as much compatibility as possible.
Functionality
It is worth noting that LIT can be ran with multiple configurations, the ones displayed in the Post Installation Report reflect values that run LIT with the Vertcoin Mainnet. Please be aware that the Vertcoin Testnet chain has not been mined 100% of the time in the past, if you make transactions on the Vertcoin testnet that do not go through it is likely because the chain has stopped being mined.
BE CAREFUL WITH YOUR COINS, ONLY TEST WITH WHAT YOU ARE OKAY WITH LOSING IF YOU USE THE MAINNET.

Vertcoin Testnet Coins

https://tvtc.blkidx.org/faucet/
I've included some documentation on LIT I created which includes information I found to be useful: https://github.com/e-corp-sam-sepiol/vertnode/blob/mastedocs/lit.md
Please visit the mit-dci/lit github repository for the most up to date information on lit: https://github.com/mit-dci/lit

Vertnode | Automated Vertcoin Node Installation Script

https://github.com/e-corp-sam-sepiol/vertnode

Recommended: Use Etcher to install the chosen OS to your microSD card / USB flash drive.

If you intend on installing Ubuntu Server 16.04 to your Intel NUC please use Etcher to install the .iso to your USB flash drive.
https://etcher.io/
PLEASE NOTE THIS SCRIPT MAY GIVE AN ERROR. THIS IS THE NATURE OF TESTING. PLEASE REPORT YOUR ERRORS IF YOU WANT THEM TO BE FIXED/RESOLVED. THANK YOU FOR BETTERING THE DEVELOPMENT OF THIS SCRIPT.

Ubuntu Server 16.04 Setup Details

You can use different clients to ssh into your node. One option is using PuTTY or Git Bash on Windows which is included in the desktop version of Git. If you are using Linux you can simply open a new terminal window and ssh to the IP address of your node (hardware you intend installing the Vertcoin node on).
You will need to know the IP address of your node, this can be found on your router page.
ssh 192.168.1.5 -l pi For example, this command uses ssh to login to 192.168.1.5 using the -l login name of pi. The IP address of your node will likely be different for you, in this example I am logging into a Raspberry Pi which has a default login name of pi.
A brief list of commands that can be used to check on the Vertcoin node status:
vertcoin-cli getblockchaininfo | Grab information about your blockchain
vertcoin-cli getblockcount | Grab the current count of blocks on your node
vertcoin-cli getconnectioncount | Grab the current count of connections to your node. A number of connections larger than 8 means that you have incoming connections to your node. The default settings are to make 8 outgoing connections. If you want incoming connections please port forward your Raspberry Pi in your Router settings page.
vertcoin-cli getpeerinfo | Grab the information about the peers you have connected to / are connected to
vertcoin-cli getnettotals | Grab network data, how much downloaded/upload displayed in bytes
tail -f ~/.vertcoin/debug.log | Output the latest lines in the Vertcoin debug.log to see verbose information about the Vertcoin daemon (ctrl+c to stop)
Thank you to all who have helped me and inspired me thus far, @b17z, @jamesl22, @vertcoinmarketingteam, @canen, @flakfired, @etang600, @BDF, @tucker178, @Xer0
This work is dedicated to the users of Vertcoin, thank you for making this possible.
7/20/2018 Thank you @CommodoreAmiga for the incredibly generous tip <3
You can reach me @Sam Sepiol#3396 on the Vertcoin Discord, here on reddit or @ [email protected]
submitted by ecorp-sam-sepiol to vertcoin [link] [comments]

How to get a public static ip for your local lightning node

My lightning node is a node that is running locally on my server hardware in my house down under, far from the New Jersey Digitalocean datacenter, which is what will come up if you look up the ip of the node. This is done via an OpenVPN tunnel from your local machine to a VPS. I am doing this by renting a VPS from Digitalocean for $20 a month (2 vCPUs, 2GB RAM) running Ubuntu 18.04. You can do this just as easily on a $5 a month VPS with 1 vCPU and 1GB RAM or even a $2.50 a month VPS from Vultr with 512MB RAM. I needed the extra power because I have many web services running there as well.
This setup allows me to have a highly available lightning node, not affected by my home IP address changing. If you are using a mobile connection or have a CGNAT, you wont be able to port forward for your lightning node. This setup allows you to do so. You can also use this to make a portable lightning node, which can get you a full lightning node wherever you have power and internet, without having to mess with network settings. If you don't want others to know your home IP, this is a good option for privacy.
  1. Setup a local lightning node, preferably on a linux machine. I followed the Raspibolt tu`ial (with some tweaks) on a 2 vCPU and 8GB RAM VM running Ubuntu 16.04.
  2. Get a VPS with a static IP address. Digitalocean and Vultr VPSs already are. This VPS wont need much power, so get the cheapest one you can.
  3. Secure the VPS. I used this tutorial. Essentially, setup a non root user, use ssh keys, and setup ufw. Also make sure to allow port 9735 through ufw for lightning. I also additionally made adjustments to the ssh config and installed fail2ban.
  4. Setup an OpenVPN server on the VPS. I used this tutorial.
  5. Install on OpenVPN client on the local linux machine and connect to the server. The tutorial from step 4 shows how to this. Keep this connected for step 6.
  6. SSH into the VPS and figure out the OpenVPN IP address of the client. It should be 10.8.0.x. To figure out the x, setup a simple python web server or something on the local machine on port 8000 or something and open the port on ufw in the local machine. Keep the OpenVPN connection, and use a new ssh session when accessing your local machine. Don't kill the OpenVPN connection, as it may complicate things when finding the ip.
    mkdir testweb
    cd testweb
    echo hello >> index.html
    sudo ufw allow 8000
    python -m SimpleHTTPServer 8000
  7. SSH back into the VPS. Run the curl command below, and try all the numbers between 2-10 for x. When you get hello as your output, then you found the right IP. I found mine at 6. You may have to try higher numbers, but this is unlikely. You can kill your python webserver on your local machine once you find it.
    curl 10.8.0.x:8000
  8. Once you have the IP, you want to make this static, so it doesn't change when you reconnect. This is done on the VPS side, so ssh back into the VPS. This tutorial worked for me. Just make sure to change values like the CommonName and and the IP to match yours (client1 and 10.8.0.x). If it doesn't work search "make openvpn ip static" and look around.
  9. SSH into your local machine, and make the OpenVPN connection persistent. You can kill the OpenVPN connection now. Doing this and this worked for me. If it doesn't work search "openvpn keepalive" or "openvpn auto connect linux" or "make openvpn connection persistent linux".
  10. Restart your local machine, and make sure it connects on boot. Do the python webserver test again, and make sure the same ip is shown on the VPS, and it is still accessible.
  11. SSH back into the VPS. Now, you have to port forward with iptables. you have to add the 2 lines below starting with -A PREROUTING in the same place in your /etc/ufw/before.rules file. Here is what mine looks like. Change the x to your OpenVPN IP. Do sudo ufw disable and sudo ufw enable to restart ufw to update your changes.
    *nat
    :POSTROUTING ACCEPT [0:0]
    -A PREROUTING -i eth0 -p tcp -m tcp --dport 9735 -j DNAT --to-destination 10.8.0.x:9735
    -A PREROUTING -i eth0 -p udp -m udp --dport 9735 -j DNAT --to-destination 10.8.0.x:9735
    -A POSTROUTING -s 10.8.0.0/8 -o eth0 -j MASQUERADE
    COMMIT
  12. SSH into your local machine. Change your lnd.conf to match with this setup, like changing the externalip. Here is what my config looks like, a slight tweak from the Raspibolt one:
    [Application Options]
    debuglevel=info
    maxpendingchannels=5
    alias=GCUBED [LND]
    color=#68F442
    listen=0.0.0.0:9735
    externalip=157.230.95.74:9735
    [Bitcoin]
    bitcoin.active=1
    bitcoin.mainnet=1
    bitcoin.node=bitcoind
    [autopilot]
    autopilot.active=1
    autopilot.maxchannels=5
    autopilot.allocation=0.6
  13. Do a sudo service lnd restart to restart lnd and apply the changes. Remember to do a lncli unlock after any restarts. Your lnd node should now have a public static ip. Look it up a few hours after you do this on 1ml, your ip should be the one of your VPS now.
I am monitoring this for free with uptimerobot. It will notify you if it has gone down. So far mine has been running for 3 days and hasn't gone down.
EDIT: Formatting
EDIT 2: The main reason I didn't use a ddns or a hidden service was mainly for high uptime, and low latency. I am planning on developing a lapp with this node and I didn't want to risk any downtime. Running lightning as a hidden service is a great idea as well, this tutorial shows how to achieve something similar with the clearnet.
EDIT 3: You can achieve a similar result from using TOR
submitted by ggelango to Bitcoin [link] [comments]

Creating a Headless Staking Node on Ubuntu 18.04

Creating a Headless Staking Node on Ubuntu 18.04
##UPDATE## Step 8 - Option 2, has some bugs in the final build process. i haven't had time to work them out yet!

This guide will take you through building and running a headless x42 Full Node! The OS I am using here is Ubuntu 18.04, this guide picks up from a complete/fresh ubuntu install.
This is meant to setup a staking node and so this guide will run you through building, configuring and setting up staking. It will not cover sending transactions or anything else.
The things we are going to do:
  • Step 1 - Install .net core
  • Step 2 - Download The x42 Node Source & Compile It
  • Step 3 - Setting The x42 Node Up To Run On Boot
  • Step 4 - Setup A New Wallet
  • Step 5 - Configure The x42 Daemon
  • Step 6 - Get Address
  • Step 7 - Check Balance
  • Step 8 - Connect The UI Wallet To A Headless Node
  • Step 8 - [Option 1 - Use Installer] Connect The UI Wallet To A Headless Node
  • Step 8 - [Option 2 - Build/Compile UI Only] Connect The UI Wallet To A Headless Node # BROKEN#

Step 1 - Install .net Core

Here is the reference link:
https://dotnet.microsoft.com/download/linux-package-manageubuntu18-04/sdk-current
Register Microsoft Key’s & Install Their repos:
cd /tmp wget -q https://packages.microsoft.com/config/ubuntu/18.04/packages-microsoft-prod.deb sudo dpkg -i packages-microsoft-prod.deb sudo add-apt-repository universe sudo apt -y install apt-transport-https sudo apt update sudo apt -y install dotnet-sdk-2.2 
Microsoft collect telemetry data by default, if you are part of the “tin foil hat brigade” you can set the following environment variable to turn it off:
echo "DOTNET_CLI_TELEMETRY_OPTOUT=1" >> /etc/environment 
now you should be at a point where .net core is installed on your system… that wasn’t so hard was it! You can check by running the following command:
dotnet--list-sdks 
The output should look like this:
$ dotnet --list-sdks 2.2.103 [/usshare/dotnet/sdk] 

Step 2 - Download & Compile The x42 Node

This part assumes you have GIT installed, if not:
apt -y install git 
Now to pull down the source and compile it!
cd ~/ git clone https://github.com/x42protocol/X42-FullNode.git # “cd” into the source folder cd X42-FullNode/src/ 
Now .net core uses NuGet for package management, before we compile, we need to pull down all of the required packages.. its as simple as running (this will take a couple of minutes) inside of “X42-FullNode/src/”:
dotnet restore 
now we are ready to compile the source, execute (inside of “X42-FullNode/src/”):
dotnet build --configuration Release 
ignore the yellow warnings, this is just the rosyln compiler having a grumble.. if you get red ones then something went wrong! The “--configuration Release” will strip out all debug symbols and slim things down.. only a little, this optional parameter is not mandatory.
Once this is done everything is built/compiled, you can run the daemon directly from the repository, this can be done by going to:
cd ~/X42-FullNode/src/x42.x42D/bin/Release/netcoreapp2.1 dotnet x42.x42D.dll 
this will kick off the node, however if you exit SSH at this time it will kill the process! however I always recommend copying out the binaries to a separate folder. This can be done with the following:
mkdir ~/x42node mv ~/X42-FullNode/src/x42.x42D/bin/Release/netcoreapp2.1/*.* ~/x42node/ 
now we have everything we need to run the node outside the git repository! What we need to do now is run the node and have it create the default x42.conf file.. so
cd ~/x42node dotnet x42.x42D.dll 
feel free to hit “CTRL + C” to exit the application after a couple of seconds, by then the folders/files would have been created at the following path:
~/.x42node/x42/x42Main/ 

Step 3 - Setting The x42 Node Up To Run on Boot

Now we are going to create a service file so our x42 node automatically starts when the system is rebooted.
THINGS TO NOTE ABOUT BELOW.. CHANGE THE ##USER## to the username your currently using as these files are within your home directory!
We need to drop to root for this..
sudo -i cat < /etc/systemd/system/x42node.service [Unit] Description=x42 Node [Service] WorkingDirectory=/home/##USER##/x42node ExecStart=/usbin/dotnet /home/##USER##/x42node/x42.x42D.dll Restart=always # Restart service after 10 seconds if the dotnet service crashes: RestartSec=10 SyslogIdentifier=x42node User=##USER## Environment=ASPNETCORE_ENVIRONMENT=Development [Install] WantedBy=multi-user.target EOF 
To enable the service, run the following (as the root user):
systemctl enable x42node.service 
BOOM.. the node isn’t running yet.. but next time the system restarts it will automatically run!
now lets exit out of root!
exit 
We can now start the node up and begin downloading blocks, by running the following command:
sudo systemctl start x42node.service 
if you want to check its loaded and see some of the output, you can run:
sudo systemctl status x42node.service 
an example of the output:
$ sudo systemctl status x42node.service ● x42node.service - x42 Node Loaded: loaded (/etc/systemd/system/x42node.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2019-01-24 15:47:55 UTC; 14s ago Main PID: 5456 (dotnet) Tasks: 23 (limit: 1112) CGroup: /system.slice/x42node.service └─5456 /usbin/dotnet /home/darthnoodle/x42node/x42.x42D.dll Jan 24 15:48:09 x42staking x42node[5456]: Batch Size: 0 Mb (0 headers) Jan 24 15:48:09 x42staking x42node[5456]: Cache Size: 0/50 MB Jan 24 15:48:09 x42staking x42node[5456]: Jan 24 15:48:09 x42staking x42node[5456]: =======Mempool======= Jan 24 15:48:09 x42staking x42node[5456]: MempoolSize: 0 DynamicSize: 0 kb OrphanSize: 0 Jan 24 15:48:09 x42staking x42node[5456]: Jan 24 15:48:09 x42staking x42node[5456]: info: Stratis.Bitcoin.Connection.ConnectionManagerBehavior[0] Jan 24 15:48:09 x42staking x42node[5456]: Peer '[::ffff:86.184.76.255]:52342' connected (outbound), agent 'x42:1.2.13 (70012)', height 213920 Jan 24 15:48:09 x42staking x42node[5456]: info: Stratis.Bitcoin.Connection.ConnectionManagerBehavior[0] Jan 24 15:48:09 x42staking x42node[5456]: Peer '[::ffff:86.184.76.255]:52342' offline, reason: 'Receiving cancelled.'. All node screen output can be found in the /valog/syslog file. 

Step 4 - Setup a New Wallet

With the Node running, we now need to setup and/or restore a wallet!
Everything will be performed through the API’s, however by default these API’s are listening on localhost (127.0.0.1), if you are connecting in remotely then this would be a problem since you cant hit that IP. The solution, SSH TUNNEL!
Execute the following command on your local system:
ssh -L 42220:localhost:42220 @ 
This binds the local port (on your system) with 127.0.0.1:42220 on the remote system, once you have executed the command you can type the following address in your laptop/desktop’s web browser and be able to access the API’s:
http://127.0.0.1:42220/swaggeindex.html 
It should look something like this:
https://preview.redd.it/9lzeg3vob8d21.jpg?width=482&format=pjpg&auto=webp&s=b5d574998816056140d5d6de7b03c56772a892fe
To Create a new wallet, first we have to generate some mnemonic works (e.g. the seed), you can do that by going to the following API:
/api/Wallet/mnemonic 
Hit the “Try it out” button which then prompts you for 2 fields:
https://preview.redd.it/dvbdllfrb8d21.jpg?width=722&format=pjpg&auto=webp&s=766d14bafba6facbcd56d31c63c0012748e682e5
Enter “English” and I would recommend 24 words as this greatly increases the seed strength! Once that is done you hit execute and then scroll down to see the “Response Body”, this should contain the mnemonic which you are going to use to create the wallet! This looks something like below:
https://preview.redd.it/6p4q0rsub8d21.jpg?width=603&format=pjpg&auto=webp&s=44b9265626467a43ca670b134c4d28187f475c2e
THIS IS VERY IMPORTANT, BACKUP THIS MNEMONIC TO A SAFE SECURE LOCATION THAT IS ENCRYPTED!!!
So now we have our mnemonic, its time to generate the wallet, for this we need to use the API:
/api/Wallet/create
There are a number of parameters which are required in order to create a wallet:
WalletCreationRequest{ mnemonic string password* string passphrase* string name* string } 
It should be noted that the password and mnemonic are is the most important parts of this request where the “password” will encrypt the wallet and Is required to unlock it.
  • Hit the “Try it out” button
  • input the necessary data
  • Insert the mnemonic
  • Put a password & passphrase
  • “Name” is what your wallet will be called
It should look something like the following:
https://preview.redd.it/958ttfbxb8d21.jpg?width=603&format=pjpg&auto=webp&s=ce48336436ea4b469b5e87513da802de0bf444ee
Hit “Execute”, the “Loading” sign may spin for a few minutes while the wallet is created… once the wallet has been created the “Response Body” will return the mnemonic you have just used.. we now have a wallet!!
HOWEVER IT IS NOT LOADED INTO THE NODE JUST YET!
This is where we will now jump back out and to configure the node to automatically load the wallet and automatically start staking when it first loads.
AGAIN BACKUP YOUR MNEMONIC AND PASSWORD, MAKE SURE THEY ARE ENCRYPTED AND STORED SOMEWHERE SAFE!

Step 5 - Configure The x42 Daemon

Now we are going to modify the x42.conf file in order to automatically load our wallet and start staking 😊
First things first, lets stop our node by running the following command:
sudo systemctl stop x42node.service 
CD to the following folder and view its contents:
~/.x42node/x42/x42Main ls -lah 
within that folder there should be 2 files you are interested in:
-rw-r--r-- 1 darthnoodle darthnoodle 18K Jan 28 16:01 TestWallet.wallet.json -rw-rw-r-- 1 darthnoodle darthnoodle 3.1K Jan 24 15:25 x42.conf 
So TestWallet.wallet.json is our physical wallet that will be loaded, but for right now we want to modify the x42.conf file.. fire up your favourite text editor (if you use VI you’re a masochist)..
nano x42.conf 
The area we are interested in is the following:
####Miner Settings#### #Enable POW mining. #mine=0 #Enable POS. #stake=0 #The address to use for mining (empty string to select an address from the wallet). #mineaddress= #The wallet name to use when staking. #walletname= #Password to unlock the wallet. #walletpassword= #Maximum block size (in bytes) for the miner to generate. #blockmaxsize=1000000 #Maximum block weight (in weight units) for the miner to generate. #blockmaxweight=1000000 #Enable splitting coins when staking. #enablecoinstakesplitting=1 #Minimum size of the coins considered for staking, in satoshis. #minimumstakingcoinvalue=10000000 #Targeted minimum value of staking coins after splitting, in satoshis. #minimumsplitcoinvalue=10000000000 
Uncomment (remove the #) of the following lines and change their value:
stake=1 (changed to 1) walletname=TestWallet (changed to our Wallet Name) walletpassword=password123 (changed to the wallet password) 
save the file and exit back to the command prompt, now we shall restart the node with the following command:
sudo systemctl status x42node.service 
now the wallet is automatically loaded and ready for action!
YES I KNOW YOU HAVE PUT YOUR PASSWORD IN CLEARTEXT, THIS IS WHERE YOU SHOULD HARDEN YOUR BOX. IF THEY CAN GET TO THE POINT WHERE THEY CAN READ YOUR CONF FILE THEY CAN JUST GRAB YOUR WALLET AND BRUTEFORCE THE PASSWORD.
You can check its loaded by going back to the API and executing the following command:
/Dashboard 
Or execute the following command on the NODE:
curl -X GET "http://127.0.0.1:42220/Dashboard" -H "accept: application/json" 
both will produce the same output, if you scroll to the bottom you should see something like this:
======Wallets====== TestWallet/account 0, Confirmed balance: 0.00000000 Unconfirmed balance: 0.00000000 
This means the wallet is loaded and ready for action!!

Step 6 - Get Addresses

Next thing you are probably going to want is a receive address and to check the balance and TX history.. so lets start with getting an address!
Go to the following API:
/api/Wallet/unusedaddress 
Fill in the Wallet name which is “TestWallet” (in this example) and “account 0” (which is the first/default account):
https://preview.redd.it/ayri5jk0c8d21.jpg?width=602&format=pjpg&auto=webp&s=2d16bbb78da49c0125d24d0834c9454d702cb7a1
Hit execute and you should have an x42 address within the “Response Body”:

https://preview.redd.it/tmc495j3c8d21.jpg?width=349&format=pjpg&auto=webp&s=b00177f66a9e24c980d3c6d4e532a33cbf3fb0bc
BOOM… ok now we can receive funds! 😊

Step 7 - Check TX History

Go to the API and the following call:
/api/Wallet/history 
The 2 fields we are most concerned about are:
https://preview.redd.it/lw194af6c8d21.jpg?width=602&format=pjpg&auto=webp&s=27e264bc008879355ff5b9c50a0a5cb06f16e960
Input the name of the wallet and account you want to view the history of, then hit execute. The other fields can be black. This will return a list of TX’s that the wallet has received:
This should look like the following:
https://preview.redd.it/x1hgargac8d21.jpg?width=585&format=pjpg&auto=webp&s=4fd25f22772f4bcec523a6e82b321ae8146a2c75
There is an easier way of doing this, that doesn’t require you to be connected to your node.. especially if your only interested in viewing your staking rewards… THE EXPLORER!
Access the following URL:
https://explorer.x42.tech/address/ 
this will allow you to easily see all TX’s associated with this address, it should look something like below:
https://preview.redd.it/e480grscc8d21.jpg?width=601&format=pjpg&auto=webp&s=0f8a9ebc7944dfcc73f7df659bd839bb983ba90c
… and your done! By this point your node should be running, staking and you have an easy way to view transactions/rewards 😊


Step 8 - Connect The UI Wallet To A Headless Node

The UI utilises a combination of technologies, however the important part is the code attempts to access the x42 Node API on 127.0.0.1:42220.
So you have 2 options here:
  1. Download the Wallet Installers
  2. Compile The UI Yourselves
Pick the option that best suits you given the pros/cons below:
Option 1 - Pro's/Cons
Pro's
  • If you use the installer, its quick and easy.
Cons
  • This also installs an x42 node on your system which runs when the UI loads.
  • If you dont setup an SSH tunnel before running the wallet the local node will bind to the port and the tunnel wont work.. you will be connecting to the local wallet!!
Option 2 - Pro's/Cons
Pro's
  • You only run the UI, the x42 node is not installed
  • you dont have a superfluous node running, downloading blocks on your local system
Cons
  • Time Consuming
  • Have to download dependencies and manually compile the code

Pre-Requirement - Needed For Both Options!!
As previously mentioned, the UI attempts to access the API's on 127.0.0.1:42220, however our node isnt running on our local system. IN ORDER TO GET IT WORKING YOU NEED TO HAVE AN SSH TUNNEL, THIS TUNNEL NEEDS TO REMAIN ACTIVE WHENEVER YOU WANT TO ACCESS THE WALLET.
this can be done by executing the following command:
ssh -L 42220:localhost:42220 @ 


Step 8 - [Option 1 - Use Installer] Connect The UI Wallet To A Headless Node

Download and install the UI/Wallet & Node from:
https://github.com/x42protocol/X42-FullNode-UI/releases

DO NOT RUN THE WALLET YET!
Those of us who dont want to run a local node and just want the UI, execute the following commands (as an administrator):
cd C:\Program Files\x42 Core\resources\daemon\ ren x42.x42D.exe x42.x42D.exe.bak 
The above is with Windows, if your are in *NIX then locate the daemon and rename it (i will update how to do that/where to find it shortly)
Setup the SSH tunnel as outlined above, Execute the wallet and it will load, however you will see an exception:

https://preview.redd.it/9os5h8q7scd21.jpg?width=550&format=pjpg&auto=webp&s=ac45ed7bc987917142075c61fb486e7d71f820d1
dont worry, this is just the wallet trying to execute/start the x42 node which we dont want, if all works according to plan.. after you click "OK" you should now be presented with the wallet UI and have the option to select what wallet you would like to load:

https://preview.redd.it/hnyt0b4mscd21.jpg?width=958&format=pjpg&auto=webp&s=a47df710a804375d8363ffcd77d1ede2862b9b4d
... DONE!

Step 8 - [Option 2 - Build/Compile UI Only] Connect The UI Wallet To A Headless Node ###BROKEN

THIS IS STILL A WORK IN PROGRESS, THE ELECTRON BUILD DOESNT WANT TO COMPILE BECAUSE SOME CODE IS MANGLED SOMEWHERE!!

Ok, this is the fun bit! .. we need to install the following dependencies. these instructions are written for a Windows system but it should be easy enough to perform the same on a *NIX system.
Install Dependencies
In order to build the wallet UI, you need to install the following components:
  • git
  • NodeJS
  • Electron Builder
First thing you need to do is install git, so download and install the package:
https://gitforwindows.org/
Next you need to install NodeJS, download and install the package:
https://nodejs.org/en/download/
Next we need to install the node package manager:
npm install npx –verbose 
next we need to make sure we have Visual Studio build tools and Python (2.7) installed, this can be done by executing the following (AS AN ADMINISTRATOR!):
npm install -g --production windows-build-tools 
this will install the necessary tools to build C#/C++ code and python 2.7, this could take some time! When its done you should have something like the following;

https://preview.redd.it/5ekfy5g1kcd21.jpg?width=490&format=pjpg&auto=webp&s=f65196dee6f78f2ececec5ee8b5df1044d68f635

Build & Install - Windows
Create a temp folder to navigate to a folder where you want to download the GIT repository, execute the following command:
git clone https://github.com/x42protocol/X42-FullNode-UI.git 
This will clone the repository into the folder, it will only clone the wallet and not the Node source! now lets CD into the folder and build the UI:
cd X42-FullNode-UI\FullNode.UI npm install 
This will download and install all dependencies (can take a while), at the end you should see something like..

https://preview.redd.it/0zfbfxa8kcd21.jpg?width=601&format=pjpg&auto=webp&s=438d072a6ab2bc7a3d84a8dfe773968acc762bc7
Now the stock UI has a number of third-party libraries which contain some vulnerabilities, being a security conscious person, ive also run:
npm audit fix 
when this is done, we have fixed most of the package vulnerabilities 😊 We also get a complaint about the typescript library being too new for the version of angular in use, so run the following command to install the additional dependency:
npm install [email protected]">=2.4.2 <2.7.0" 
now its time to build the UI, execute the following:
npm run build:prod 
once complete you should see something like the following..

https://preview.redd.it/56vf9zfckcd21.jpg?width=601&format=pjpg&auto=webp&s=31b72daff9ab5001843cba529a7bd38c76fd099d
Next its time to compile the electron binary, it should be noted that the build/package process utilises AppVoyer which is not installed and if you attempt to build right now you will get the following error:
cannot expand pattern "${productName}-v${version}-setup-${os}-${env.arch}.${ext}": env arch is not defined. 
To fix this we need to modify the build file, this is a quick one liner that can do it:
powershell -Command "(gc electron-builder.json) -replace 'env.arch', 'arch' | Out-File electron-builder.json" 
Essentially the offending line for Windows is..
"artifactName": "${productName}-v${version}-setup-${os}-${env.arch}.${ext}" 
The build cannot resolve “env.arch”, so the above one liner replaces “env.arch” with “arch” which works 😊
execute the following command:
npx electron-builder build --windows --x64 
At present i get the following error, no matter what i do.. and ive ran out of time to go hunting about.. if anyone has any ideas on how to fix then please post in here or message me on discord:

https://preview.redd.it/t66rtuqdtcd21.jpg?width=918&format=pjpg&auto=webp&s=a3f1a5ff682586348909c67645ca7ae9454922ff


Happy staking!

If you found this post helpful, then buy me a beer and send a donation to XQXeqrNFad2Uu7k3E9Dx5t4524fBsnEeSw
submitted by D4rthNoodle to x42 [link] [comments]

Dogecoin on Linux - The Complete Beginner's Guide

I'm writing this because I couldn't find a single condensed guide on compiling the wallet and running mining software on linux, specficially Ubuntu/Linux Mint. I combed Bitcoin and Litecoin forums for similar problems I was running into and eventually got everything nailed down, so here it is in one place, for new Shibes.
If you want to make a Dogecoin directory in your downloads folder to keep things organized, you will need to modify these commands to refelct the change. So instead of going to ~/Downloads/ you will need to go to ~/Downloads/Dogecoin and be sure to put the zipped files there when you download them, but the commands will be the same otherwise.
cwayne18 put in the work to make a PPA for the QT client here.
Ubunutu/Mint/Debian users should be able to install the client with the following commands:
sudo add-apt-repository ppa:cwayne18/doge sudo apt-get update && sudo apt-get install dogecoin-qt 
To update using this method, run
sudo apt-get update && sudo apt-get upgrade dogecoin-qt 
Compiling the Wallet Manually
I suggest using the PPA above, but if you want to compile manually, here you go.
1)Download the newest source from here. If you want to check out the Github page, click here
2)Unzip the package with the native client OR, navigate to your downloads and unzip
cd ~/Downloads unzip dogecoin-master.zip 
3)Now it's time to compile. You will need to install the dependencies, just copy and paste the following code. It will be a fairly large download and could take some time. It is always important to update before installing any new software, so we'll do that first and then install the dependencies.
sudo apt-get update sudo apt-get upgrade sudo apt-get install libssl-dev libdb-dev libdb++-dev libqrencode-dev qt4-qmake libqtgui4 libqt4-dev sudo apt-get install libminiupnpc-dev libminiupnpc8 libboost-all-dev build-essential git libboost1.53-all-dev 
4)Once that is done, go to the doge-coin master directory and compile:
cd ~/Downloads/dogecoin-maste sed -i 's/-mgw46-mt-sd-1_53//g' dogecoin-qt.pro qmake USE_UPNP=- USE_QRCODE=0 USE_IPV6=0 make -j3 
After running the qmake command you will likely see some text similar to
Project MESSAGE: Building without UPNP support Project MESSAGE: Building with UPNP supportRemoved plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. 
It's perfectly normal, so don't worry about that.
Your Dogewallet is ready to go! The executable is in ~/Downloads/dogecoin-maste and called dogecoin-qt. Your wallet information is in ~/.dogecoin. You can run the wallet at any time by opening terminal and typing
cd ~/Downloads/dogecoin-maste ./dogecoin-qt 
Future upgrades to dogewallet are easy. Back up your wallet.dat, and simply follow the same directions above, but you'll be unzipping and building the newer version. You will likely need to rename the old dogecoin-master directory in ~/Downloads before unzipping the newest version and building. Also, it is likely that you will not need to install the dependencies again.
Alternate Method For Installing Dogecoin Wallet from Nicebreakfast
After installing the dependencies listed in step 3, open terminal, then navigate to where you want Dogecoin Wallet stored and run:
git clone https://github.com/dogecoin/dogecoin ./autogen.sh ./configure make 
then when the wallet is updated just run
git pull 
from the dogecoin directory.
GPU Mining
GPU mining requires CGminer. My suggestion is to get the executable already built. The creator of cgminer has removed the built file from his website, but I've uploaded it here
sudo apt-get install pkg-config opencl-dev libcurl4-openssl-dev autoconf libtool automake m4 ncurses-dev cd ~/Downloads tar -xvf cgminer-3.7.2-x86_64-built.tar.bz2 
Don't use anything newer than 3.7.2. The newer versions of CGMiner don't support GPU mining.
That's it! You have cgminer ready to go! You will run cgminer with the following syntax
cd ~/Downloads/cgminer-3.7.2-x86_64-built/ ./cgminer --scrypt -o stratum+tcp://SERVERNAME:PORT -u WORKER.ID -p PASS 
A good guide for fine tuning cgminer can be found here; follow the litecoin example.
EDIT
I had trouble getting cgminer running with a single line command, but running it via an executable .sh file works. This is covered in the cgminer setup guide I posted above but I'll put it here too. In the same directory that has the cgminer executable, you need to make a file called cgminer.sh and make it executable. It should contain the follwing:
export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export DISPLAY=:0 find *.bin -delete sleep 5 ./cgminer 
Then you can call cgminer in terminal by doing ./cgminer.sh You will need a cgminer.conf file containing all your options. All of this is covered in the guide that is linked above.
A quick note about AMD drivers: They used to be a huge PITA to install and get working, but the newest Catalyst drivers are great. There's a GUI installer, everything works out of the box, and there is a lot of documentation. You can download them here: AMD Catalyst 14.6 Beta Linux
CPU Mining
For CPU mining I use minerd because it doesn't require any work to get running, simply download it and get to work. Download the built file for your machine 32-bit or 64-bit, and then unzip it and you're ready to go!
cd ~/Downloads tar -xvf pooler-cpuminer-2.3.2-linux-x86.tar.gz 
The executable is called minerd and it will be in ~/Downloads but you can move it to wherever you like. To run it, pull up terminal and do
cd ~/Downloads minerd --url=stratum+tcp://SERVER:PORT --userpass=USERNAME.WORKERNAME:WORKERPASSWORD 
You're done! Happy mining!
Common Issues
I ran into this and I've seen others with this problem as well. Everything installs fine but there is a shared library file that isn't where it should be. In fact, it isn't there at all.
 libudev.so.1: cannot open shared object file: No such file or directory 
In terminal, do
sudo updatedb locate libudev.so.0.13.0 
And it will probably return a path /lib/x86_64-linux-gnu. Inside that directory there's a library file called libudev.so.0.13.0. You'll need to make a symlink (aka shortcut) that links libudev.so.1 to libudev.so.0.13.0 So, assuming you're working with libudev.so.0.13.0 do this
cd /lib/x86_64-linux-gnu sudo ln -s libudev.so.0.13.0 libudev.so.1 
Now if you do
ln -l 
You should see
libudev.so.1 -> ./libudev.so.0.13.0 
Meaning you've made the symlink. Also, the text for libudev.so.1 will be blue.
submitted by Boozybrain to dogecoin [link] [comments]

Mega FAQ (Or: Please come here for your questions first)

Qbundle Guide (Step by step setup & Bootstrap) https://burstwiki.org/wiki/QBundle
1( I want to mine or activate My account. Where do find the multiple coins?
You only need 1, an outgoing transaction or reward reassignment will set the public key. Get them from:
https://www.reddit.com/burstcoinmining/comments/7q8zve/initial_burstcoin_requests/
Or (Faucet list)
https://faucet.burstpay.net/ (if this is empty, come back later)
http://faucet.burst-coin.es
Or
https://forums.getburst.net/c/new-members-introductions/getting-started-initial-burstcoin-requests
2( I bought coins on Bittrex and want to move to my new wallet, but can't. Why?
Bittrex will only send to accounts with a public key (not a Burst requirement) so see number 1 and either set the name on the account (IF you will not mine) or set the reward recipient to the pool. Either action will enable the account and allow for transfers from Bittrex.
3( I sent coins from Poloniex/anywhere to Bittrex and they don’t show up after a considerable time. Why?
You need to set an unencrypted message on the transaction, informing Bittrex which account to send the funds to (this is in the directions on Bittrex). Did you do this? Contact Bittrex support with all the details and eventually you will get your funds.
4( How much can I make on Burst?
https://explore.burst.cryptoguru.org/tool/calculate
Gives you an average over time assuming a few things like: Average luck/100% uptime/no overlapping/fees on pool/good plot scan time (<20 seconds) if you do not have all of these, you may not see that number.
5( If I use SSD’s would I make more money?
No, it’s 95% capacity and 5% scan time that determine success. More plot area = better deadlines = better chance of forging a block, or better rates from a pool.
6( What is ‘solo’ and ‘pool’ (wasn’t his name Chewbacca?)
Solo is where you attempt to ‘forge’ (mine) a block by yourself; you get 100% of the block reward and fees. But you only receive funds if you forge, no burst for coming in second place.
Pools allow a group of miners to ‘pool’ together their resources and when a miner wins, they give the pool the winnings (this is done by the reward assignment you completed earlier), it is then divided according to different percentages and methods and burst is sent out according to pool rules (minimum pay-out, time, etc.)
7( I have been mining for 2 days and my wallet doesn’t show any Burst WHY?
Mining solo: it is win-or-lose, nothing in between, and wining is luck and plot size. Pool mining: because it costs 1 burst to send burst, the pools have either a time requirement (every X days) or a minimum amount (100 burst +) so you need to research your pool. Some pools allow for you to set the limit (cryptoGuru and similar) to be met before sending
8( How do I see what I have pending?
On CryptoGuru, based pools, it’s the ‘Pending (burst)’ column, other pools, look for the numbers next to your burst ID. One is Paid and the other pending.
9( I’m part of a pool and I forged a block, but I didn’t recieve the total value of the block, why?
A pool has 2 basic numbers that denote the pay-out method, in the format ‘XX-XX’ (i.e. 50-50) The first number is the % paid to the block forger (miner) and the second is the retained value, which is paid to historic ‘shares’ (or, past blocks that the pool didn’t win, but had a miner that was ‘close’ to winning with a good submitted deadline)
Examples of pools:
0-100 (good for <40TB)
20-80 (30-80TB)
50-50 (60-200TB)
80-20 (150-250)
100-0 (solo mine, 150+ TB)
Please note that there is an overlap as this is personal preference and just guidance; a higher historical share value means a smoother pay-out regime, which some people prefer. If fees are not factored in, or are the same on different pools, the pay-out value will be the same over a long enough period.
10( Is XXX model of hard drive good? Which one do you recommend?
CHEAP is best. If you have 2 new hard drives, both covered by warranty, get the one with the lowest cost per TB (expressed as $/TB , calculated by dividing the cost by the number of terabytes) because plot size is KING,
11( How many drives can I have on my machine?
For best performance, you can have up to 2 drives per thread (3 on a new fast AVX2 CPU). So that quad-core core-2-quad can have up to 8 drives, but a more modern i7 with 4 cores + hyper threading can squeeze 8 * 3 or 24 drives. (Performance while scanning will suffer)
12( Can I game while I mine?
Some people have done so, but you cannot have the ‘maximum’ number of drives and play games generally.
13( Can I mine Burst and GPU mine other coins?
Yes, if you CPU Mine Burst.
14( I’m GPU plotting Burst and GPU mining another coin, my plots are being corrupted, why?
My advice is dedicating a GPU to either mining or plotting, don’t try to do both.
15( What is a ‘plot’?
A plot is a file that contains Hashes, these hashes are used to mine burst. A plot is tied to an account, but they can be created (with the same account ID) on other machines and connected back to your miner(s).
16( Where can I trade/buy/sell Burst?
A list of exchanges is maintained on https://www.reddit.com/burstcoin/ (on the right, ‘Exchanges’ tab) the biggest at the moment are Bittrex and Poloniex, some offer direct Fiat-to-Burst purchase (https://indacoin.com for example)
17( Do I have to store my Burst off the exchange?
No, but it’s safer from hackers who target exchanges, if you cannot guarantee the safety or security of your home computer from Trojans etc, then it might be best to leave on an exchange (but enable 2FA security on your account PLEASE!)
18( What security measures can I take to keep my coin safe?
When you create an account, sign out and back in to your wallet (to make sure you have copied the pass phrase correctly) and keep multiple copies of the key (at least one physically printed or written down and in a safe place, better in 2 places) do not disclose the passphrase to anyone. Finally use either a local wallet or a trusted web wallet (please research before using any web wallet)
19( How can I help Burst?
Run a wallet, which will act as a node (or if you’re a programmer, contact the Dev team Bring attention to burst (without ‘shilling’ or trying to get people to buy) And help translate into your local language
Be a productive member of the community and contribute experience and knowledge if you can, or help others get into Burst.
20( Will I get coins on the fork(s) and where will they be?
There will be no new coin, and no new coins to be given/air dropped etc, the forks are upgrades to burst and there will not be a ‘classic’ or ‘new’ burst.
21( Will I need to move my Burst off of the exchange for the fork?
No, your transactions are on the block chain, which will be used on the fork, they will be visible after the move; nothing will need to be done on your side.
22( Where can I read about the progress of Burst and news in general on the community?
There is no finer place than https://www.burstcoin.ist/
23( What are the communities for Burst and the central website?
Main website: https://www.burst-coin.org/
Reddit: https://www.reddit.com/burstcoin and https://www.reddit.com/burstcoinmining/
Burstforum.net: https://www.burstforum.net/
Getburst forum: https://forums.getburst.net/
Official Facebook channel: https://m.facebook.com/groups/398967360565392
(these are the forums that are known to be supporting the current Dev Team)
Other ways to talk to the community:
Discord: https://discordapp.com/invite/RPhpjVv
Telegram (General): https://t.me/burstcoin
Telegram (Mining): https://t.me/BurstCoinMining
24( When will Burst partner up with a company?
Burst is a currency, the USD does not ‘partner up’ with a company, the DEV team will not partner up and give over to special interests.
25( Why is the DEV team anonymous?
They prefer anonymity, as it allows them to work without constant scrutiny and questions unless they wish to engage, plus the aim is for Burst to become a major contender, and this brings issues with security. They will work and produce results, they owe you nothing and if you cannot see the vision they provide then please do not ‘invest’ for short term gain.
26( When moon/Lambo/$100/make me rich?
My crystal ball is still broken, come back to the FAQ later for answer (seriously, this is a coin to hold, if you want to day-trade, good luck to you)
27( How can I better educate myself and learn about Dymaxion?
Read about the Dymaxion here: https://www.reddit.com/burstcoin/wiki/dymaxion
28( My reads are slow, why?
There are many reasons for this, if your computer has a decent spec it’s likely due to USB3 hub issues, or plugging into a USB2 hub, but other reasons can be multiple plots in the same folder, but it’s best to visit the mining subreddit. They can help more than an simple FAQ https://www.reddit.com/burstcoinmining/
29( I have a great idea for Burst (not proof of stake related)?
Awesome! Please discuss with the DEV team on discord https://discordapp.com/invite/RPhpjVv
(Please be aware that this is a public forum, you need to find who to ask/tell)
30( I have a great idea for Burst (Proof of stake related)?
No. if you want a POS, find a POS coin. On the tangle which is being implemented a POS/POW/POC coin can be created, but BURST will always be POC mined. You are welcome to implement a proof of stake coin on this!
31( Will the Dev team burn any coins?
Burst is not an ICO, so any coins will need to be bought to be burnt. You are welcome to donate, but the DEV team have no intention of burning any coins, or increasing the coin cap.
32( When will there be an IOS wallet?
IOS wallet is completed; we are waiting for it to go on the app store. Apple is the delaying factor.
33( Why do overlapping plots matter?
Plots are like collections of lottery tickets (and if only one ticket could win). Having 2 copies is not useful, and it means that you have less coverage of ‘all’ the possible numbers. It’s not good, avoid.
34( My local wallet used to run, I synchronised it before and now it says ‘stopped’. when I start it, it stops after a few seconds, what should I do?
I suggest that you change the database type to portable MariaDB (on Qbundle, at the top, ‘Database’ select, ‘change database’) and then re-import the database from scratch (see 35)
35( Synchronising the block chain is slow and I have the patience of a goldfish. What can I do?
On Qbundle , ‘Database’ select ‘Bootstrap chain’ and make sure the CryptoGuru repository is selected, then ‘start Import’ this will download and quickly stuff the local database (I suggest Portable MariaDB, see 34) (lol, loop)
36( What will the block reward be next month/will the block rewards run out in 6 months?
https://www.ecomine.earth/burstblockreward/ Rewards will carry on into 2026, but transaction fees will be a bigger % by then, and so profitable mining will continue.
37( How can I get started with Burst (wallet/mining/everything) and I need it in a video
https://www.youtube.com/watch?v=LJLhw37Lh_8 Watch and be enlightened.
38( Can I mine on multiple machines with the same account?
Yes, if you want to pool mine this can be done (but be prepared for small issues like reported size being incorrect. Just be sure to keep question 33 in mind.)
39( Why do some of my drives take forever to plot?
Most likely they are SMR drives, it’s best to plot onto another SSD and then move the finished plot/part of a plot across to the SMR drive as this is much quicker. SMR drives are fine on the read, just random writes that are terrible.
So plot an SMR drive quickly, plot to a non SMR or better still SSD drive, in as big a chunk as possible (fewer files better) and move. a version of Xplotter, called Splotter, can do this easily.
https://github.com/NoParamedic/SPlotter
40( I have a great idea; why not get listed on more exchanges!!
Exchanges list coins because of 2 reasons:
  1. Clients email and REQUESTING Burst and provide details like:
    i. https://www.burst-coin.org/information-for-exchanges
  2. The coin pays (often A LOT, seriously we’ve been asked for 50 BTC)
I suggest you speak with your exchange and ask ‘when will they offer Burst?’
41( Do you have a roadmap?
https://www.burst-coin.org/roadmap
42( Why is the price of Burst going up/down/sideways/looping through time?
The price of burst is still quite dependent upon Bitcoin, meaning that if Bitcoin gains, the value of Burst gains, if Bitcoin drops then Burst also drops. If there is news for Burst then we will see something independent of Bitcoin moving. Variations can be because of people buying in bulk or selling in bulk. There are also ‘pump and dump’ schemes that we detest, that can cause spikes in price that have nothing to do with news or Bitcoin, just sad people taking advantage of others.
43( Where is the best place to go with my mining questions?
https://www.reddit.com/burstcoinmining/
or https://t.me/BurstCoinMining
44( What hardware do you advise me to buy, is this computer good?
See question 43 for specific questions on hardware, it depends on so many variables. The ‘best’ in my opinion is a 36 bay Supermicro storage server, usually they have dual 6-core CPU’s and space for 36 drives. No USB cables, plotting and mining monster, anything else, DYOR.
45( Where do you buy your hard drives?
I have bought most from EBay in job lots, and some refurbished drives with short warranties. Everything else I have bought, from Amazon.
46( Can I mine on my Google drive/cloud based storage?
In short: no. If you want to try, and get to maybe 1 TB and then find that your local connection isn’t fast enough, or that shortly after, your account is blocked for various reasons. Please be my guest.
47( Can I mine on my NAS?
Some you can mine with the NAS (if it can run the miner, it can scan locally) but generally they’re not very fast. good for maybe 16 TB? Having a plot on a NAS and mining from another computer depends on the network speed between the NAS and scanning computer. I believe you can scan about 8 TB (maybe a bit more) and keep the scan times to within acceptable, but YMMV.
48( How can I set up a node?
No need to set up a node, just set up a wallet (version 2.0.4) or Qbundle (2.2) and it will do the rest
49( Are the passphrases secured?
I’ll leave the effort to a few people to show how secure a 12-word passphrase is: https://burstforum.net/topic/4766/the-canary-burst-early-warning-system Key point: brute forcing it will be around 13,537,856,339,904,134,474,012,675,034 years.
50( I logged into my account (maybe with a different burst ID) and see no balance!!
I have dealt with this very issue multiple times, and there are only 3 options:
  1. You have typed in the password incorrectly
  2. You have copy-pasted the password incorrectly
  3. You are trying to log into a ‘local wallet’ which the block chain has not finished updating
The last one generally leaves the burst ID the same, but old balances will show. No, this is not a security problem, and yes, windows loves to add spaces after the phrase you enter when copied, and that space is important in getting to your account.
51( Are there channels for my language?
Telegram:
Spanish: https://t.me/burstcoin_es
German: https://t.me/Burstcoinde
Italian: https://t.me/BurstCoinItalia
Forum:
Spanish: https://burst-coin.es/index.php/forum/index
Discord:
Spanish: https://discordapp.com/invite/RaaGna9
Bulgarian: https://discord.gg/r4uzTd
(there are others, please contact me to put up)
52( I am mining in a pool, and it says that my effective capacity is lower than I actually have, why?
  1. If you've not been mining for >48 hours, or just added additional capacity, it will take time.
  2. The value fluctuates (normally, +-5% but can be up to 10% at times)
  3. Read on the ‘Quick info’ tab about adjusting your deadline to compensate for changes i. revisit once a month for best results
  4. If you have overlapping plots it will also be lower so be aware of this (see question 33)
53( What pool should I join?
First of all, read question 9, after you have understood that it depends on the size (and how patient you are) select from the following list: https://www.ecomine.earth/burstpools/
54( What miner to use?
I use Blago’s miner, there are many out there but Blago’s works for me on CPU mining, it can be found in Qbundle.
55( What Wallet to use (I use windows)?
Qbundle: https://github.com/PoC-Consortium/Qbundle/releases/ guide: https://burstwiki.org/wiki/QBundle
56( What Wallet to use (Linux)?
https://package.cryptoguru.org/ for Debian and Ubuntu, for Mac. read:
https://www.ecomine.earth/macoswalletinstallguide/
57( Will i need to 'replot' after POC2 (second fork) happens?
No, there will be a tool which will optimise, but it is not CPU intensive (it basically re-shuffles your plot) and is just IO intensive. You do not need to replot.
TurboPlotter and https://github.com/PoC-Consortium/Utilities/tree/mastepoc1to2.pl are tools that will/can be used to actuate optimization, but PLEASE wait with optimization until after the hard fork.
58( Will the transaction fee always be 1 burst?
No, dynamic fees are coming in the next fork.
submitted by dan_dares to burstcoin [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

How To Mine Bitcoin On PC, Mac, Or Linux - YouTube Cryptocurrency Mining Software Tutorial Series 7 - Futurebit Moonlander 2 on Ubuntu 14.04 OS How to mine bitcoins (solo mining) with the core client ... Bitcoin Mining on Ubuntu - YouTube Bitcoin Miner Block erupter Ubuntu tutorial

This article focuses on Ubuntu only, but the configuration and mining process are almost the same in other operating systems as well. To get optimum performance out of the miner, it’s recommended to upgrade Ubuntu to the latest stable release before continuing. The special thing about BFG Miner is it’s completely written in C language, and thus it’s quite efficient at mining bitcoins, at ... It should show the only file being the EWBF mining software. Once the file has copied we can close the scp or pscp windows on our main computer. Now we need to extract the mining software. tar -xf "Zec Miner 0.3.4b Linux Bin.tar.gz" Then check if the miner has been extracted. ls. Then remove the tar file. rm "Zec Miner 0.3.4b Linux Bin.tar.gz" As you probably already know, we try to find and feature the best Bitcoin mining software for all operating systems, and Linux mining software is no exception. In this article, I’ll show you how to setup the Bitcoin mining software for Ubuntu. Right now, we have 2 Linux mining apps featured on our website- Cudo Miner and MinerGate. NOTE: Bitcoin mining is very time consuming and you need a very powerful network of server machines to obtain even a small result (less than a bitcoin in most cases). This is due to the fact that you are competing with people and organizations running highly specialized hardware ( ASIC miners , FPGA devices etc.) which does nothing but compute BTC block hashes 24h a day. One thing to note is their warning that ASIC Miners are the only way to go in the current Bitcoin mining landscape. That's because the computational difficulty has grown to where a CPU is simply unable to do the TeraHashes/Second that is now typical. Configuration parameters. The mining pool you choose may have different policies than this. What you'll need is three items of configuration to ...

[index] [25914] [49658] [29750] [48633] [9133] [17005] [21937] [45508] [14449] [40489]

How To Mine Bitcoin On PC, Mac, Or Linux - YouTube

Linux File System/Structure Explained! ... How to Bitcoin Miner with Ubuntu VPS - Setup Nicehash Miner via Ubuntu VPS - Duration: 11:33. Cát Dự Trần 47,543 views. 11:33. How to Set Up a ... In this episode of Crypto Miner Tips, we go over how to get started Bitcoin Mining with a PC. However, the mining software mentioned in this tutorial can be ... How to mining Bitcoin with your Ubuntu VPS? Earn 0.0001 BTC per VPS, if you have 10 VPS, you will earn 0.001 BTC per day (~2.5 USD), if you have a lot of VPS, you will earn more BTC per day. Setup ... This video will demonstrate how to mine bitcoin in Linux. MINERGATE LINK: https://minergate.com/a/e13126b573b894c64393990a Bitcoin Donation : 3HNH19ss5Fd1j8j... *****UPDATE***** Solo mining has been removed from client. I'll keep the video up for how it used to work, it might still work for some alt coins (unsure) yo...

#